Cynema Soundfield > In-wall Soundbar System > CSF48P

48″ Passive Soundbar System

FEATURES

Mounting System Allows For Ideal Placement Of LCR Speakers In Any Existing Stud Configuration.
Self Contained Sealed Spaeker Modules Cleverly Tuck Down And Into0 The Wall For Outstanding Performance In A Minimal Amount Of Space.
Magnetically Attached Paintable MicroPerf Grille Provides A Nearly Invisible Look.
For Added Flexibility, The Passive CSF-48P Does Not Include An Amplifier Module, Allowing Integrators To Utilize Any Form Of Amplification.

SPECIFICATIONS

Loudspeaker Module
Dimensions: 9-5/8″ L X 4″ D X 6-1/2″ H (24.4cm L X 10.2cm D X 16.5cm H)
Wiring: Impedance- Nominal 6Ω
Sensitivty: 86 DB, 1kHz @ 1W/1m
Max SPL: 105dB (LCR System)
Frequency Response: 65Hz – 25kHz
Power Handling Capability: 100 Watts
Installation Dimensions
Frame Dimensions (with Grille): 5-1/4″ H X 48″ W (13.35cm H X 121.92cm W)
Hole Cutout Dimensions: 3-3/4″ H X 45-1/4″ W (9.53cm H X 114.94cm W)
Depth Behind Wall (5/8″ Drywall): 3-1/2″ (12.6cm)

WARRANTY

10 year limited

In-wall soundbar that installs flush below any flat panel TV

CSF48P

Stock Number FG01707

Product image
Click on image to enlarge

PDF_Download PDF_Download

The post CSF48P appeared first on Indigo Distribution.

Click on image to enlarge

The post HD-5R appeared first on Indigo Distribution.

Click on image to enlarge

The post HD-6R appeared first on Indigo Distribution.

Click on image to enlarge

In-Wall High Definition Loudspeaker; 8-in. 2-Way; Includes B

The post HD-8.3R appeared first on Indigo Distribution.

Click on image to enlarge

The post HD-8R appeared first on Indigo Distribution.

Speakers > Home Theater Loudspeakers > HDFX

High Definition, Side/Rear Channel Effects, In-wall Loudspeaker

FEATURES

5-1/4″ Injection-molded TCC (talc, Carbon, And Ceramic-filled) Polypropylene Woofer Offers Extreme Rigidity To Reduce Breakup And Lower Distortion
Long-throw Voice Coil/magnet Structure Increases Cone Excursion To Enhance Low Frequency Response And Dynamic Impact
Dual 2-1/4″ Injection-molded TCC (talc, Carbon, And Ceramic-filled) Polypropylene Full-range Drivers Fire To Either Side Providing A Uniform, Sound Field That Is Ideal For Special Effects
1″ Teteron Dome Tweeter Is Fluid Cooled And Delivers Ultra-wide Dispersion To Reproduce Clear And Detailed High Frequencies
Baffle-mounted Dipole/Bipole Switch Adjusts Surround Effects For Either Side Or Rear Placement
Baffle-mounted Effects Cut Switch Adjusts Direct/diffuse Sound Field Balance To Provide Realistic Effects Regardless Of Room Size
Baffle-mounted Bass And Treble Controls Enable Precise Tone Matching In Any Room
Includes Paintable, Textured, Pearl White ABS Frame And Microperf Aluminum Grille For A Clean And Unobtrusive Installation

SPECIFICATIONS

Impedance: 8 Ohms
Recommended Amplifier Power: 10W To 150W
Frequency Response: 65Hz – 21kHz +/-3dB
Sensitivity: 88dB With 2.83V Pink Noise Input, Measured At 1 Meter On Axis
Frame Dimensions: 8-1/4″ X 14-1/2″
Hole Cutout Dimensions: 7-1/8″ X 13-1/4″
Depth Behind Wall: 3-1/2″ (assumes 1/2″ Drywall)

WARRANTY

Lifetime Limited Warranty

For use in multi-channel music or home theater systems

About Bipole & Dipole

HDFX

Stock Number FG01155

Product image
Click on image to enlarge

PDF_Download PDF_Download

The post HD-FX appeared first on Indigo Distribution.

Speakers > Home Theater Loudspeakers > HDLCR

High Definition, Left/Center/Right Channel In-wall Loudspeaker

FEATURES

Dual 5-1/4″ Injection-molded TCC (talc, Carbon, And Ceramic-filled) Polypropylene Woofers Offer Extreme Rigidity To Reduce Breakup And Lower Distortion
Long-throw Voice Coil/magnet Structure Increases Cone Excursion To Enhance Low Frequency Response And Dynamic Impact
1″ Teteron Dome Tweeter Is Fluid Cooled And Delivers Ultra-wide Dispersion To Reproduce Clear And Detailed High Frequencies
Proprietary Tweeter-adjustment Mechanism Ratchets In 1mm Increments And Then Pivots For Precise Aiming Of High Frequencies
Bass And Treble Controls Enable Precise Tone Matching In Any Room
Includes Paintable, Textured, Pearl White ABS Frame And Microperf Aluminum Grille For A Clean And Unobtrusive Installation

SPECIFICATIONS

Impedance: 4 Ohms
Recommended Amplifier Power: 10W To 150W
Frequency Response: 65Hz – 21kHz +/-3dB
Sensitivity: 89dB With 2.83V Pink Noise Input, Measured At 1 Meter On Axis
Frame Dimensions: 8-1/4″ X 14-1/2″
Hole Cutout Dimensions: 7-1/8′ X 13-1/4′
Depth Behind Wall: 3-1/2″ (assumes 1/2′ Drywall)

WARRANTY

Lifetime Limited Warranty

For use in multi-channel music or home theater systems. Optimizes performance for applications as either center-channel or left/right loudspeaker

HDLCR

Stock Number FG01151

Product image
Click on image to enlarge

PDF_Download PDF_Download

The post HD-LCR appeared first on Indigo Distribution.

Speakers > In-Wall Loudspeakers > MP5

5 1/4″ 2-Way MP Multipurpose In-wall Loudspeaker

FEATURES

5-1/4″ Talc-filled Polypropylene Cone Is Light, Strong And Well Damped To Accommodate All Program Material
Treated Foam Cone Surround Increases Sensitivity And Provides Exceptional Durability
Proprietary Tweeter-adjustment Mechanism Ratchets In 1mm Increments And Then Pivots For Precise Aiming Of High Frequencies
3/4″ Kaladex Dome With Fluid-cooling And Ultra-wide Dispersion For Clear And Detailed High-frequencies

SPECIFICATIONS

Impedance: 8 Ohms
Recommended Amplifier Power: 5W To 60W
Frequency Response: 75Hz – 20kHz +/-3dB
Sensitivity: 87dB For 2.83V Pink Noise
Frame Dimensions: 7-1/8″ X 9-7/8″
Hole Cutout Dimension: 6-1/4″ X 9″
Depth Behind Wall: 3-5/8″ (based On 1/2″ Drywall)
MP5 Requires 5 Series Bracket Kit For Installation.
Use FG00327 Or FG00897 (sold Separately) MP5R Includes Everything Required For Installation

WARRANTY

Lifetime Limited Warranty

Tweeter can be rotated and pivoted

MP5

Stock Number FG00873

Product image
Click on image to enlarge

PDF_Download PDF_Download

The post MP-5R appeared first on Indigo Distribution.

Speakers > In-Wall Loudspeakers > MP6

6 1/2″ 2-Way MP Multipurpose In-wall Loudspeaker

FEATURES

6-1/2″ Talc-filled Polypropylene Cone Is Light, Strong And Well Damped To Accommodate All Program Material
Treated Foam Cone Surround Increases Sensitivity And Provides Exceptional Durability
Proprietary Tweeter-adjustment Mechanism Ratchets In 1mm Increments And Then Pivots For Precise Aiming Of High Frequencies
3/4″ Kaladex Dome With Fluid-cooling And Ultra-wide Dispersion For Clear And Detailed High-frequencies

SPECIFICATIONS

Impedance: 8 Ohms
Recommended Amplifier Power: 10W To 75W
Frequency Response: 65Hz – 20kHz +/-3dB
Sensitivity: 88dB For 2.83V Pink Noise
Frame Dimensions: 8-3/4″ X 11-11/16″
Hole Cutout Dimensions: 7-5/8″ X 10-5/8″
Depth Behind Wall: 3-5/8″ Deep (assumes 1/2″ Drywall)
MP6 Requires 6 Series Bracket Kit For Installation.
Use FG00320 Or FG00898 (sold Separately) MP6R Includes Everything Required For Installation

WARRANTY

Lifetime Limited Warranty

Tweeter can be rotated and pivoted

MP6

Stock Number FG00875

Product image
Click on image to enlarge

PDF_Download PDF_Download

The post MP-6R appeared first on Indigo Distribution.

Speakers > In-Wall Loudspeakers > PR5

5 1/4″ 2-Way PR Performance In-wall Loudspeaker

FEATURES

5-1/4″ Talc-filled Polypropylene Cone Is Extremely Rigid To Reduce Breakup And Lower Distortion
Butyl Rubber Cone Surround Damps Resonance And Provides Exceptional Durability
Proprietary Tweeter-adjustment Mechanism Ratchets In 1mm Increments And Then Pivots For Precise Aiming Of High Frequencies
3/4″ Kaladex Dome With Fluid-cooling And Ultra-wide Dispersion For Clear And Detailed High-frequencies

SPECIFICATIONS

Impedance: 4 Ohms Or 8 Ohms Selectable
Recommended Amplifier Power: 10W To 100W
Frequency Response: 70Hz – 21kHz +/-3dB
Sensitivity: 88dB For 2.83V Pink Noise
Frame Dimensions: 7-1/8″ X 9-7/8″
Hole Cutout Dimension: 6-1/4″ X 9″
Depth Behind Wall: 3-5/8″ (based On 1/2″ Drywall)
PR5 Requires 5 Series Bracket Kit For Installation.
Use FG00327 Or FG00897 (sold Separately) PR5R Includes Everything Required For Installation

WARRANTY

Lifetime Limited Warranty

Tweeter can be rotated and pivoted
Baffle-mounted bass and treble tone controls for acoustical adjustments

PR5

Stock Number FG00877

Product image
Click on image to enlarge

PDF_Download PDF_Download

The post PR-5R appeared first on Indigo Distribution.